Written by Elizabeth · Published June 15, 2023
Reviewed & Updated by Olivia · Updated on July 28, 2026
Disclosure: This review contains affiliate links. If you buy through them we may earn a small commission at no extra cost to you.
⚡ Verdict
The Akko MOD 007 V2 is a 75% gasket-mount keyboard kit with a CNC aluminum case, a hot-swap PCB, and both aluminum and polycarbonate plates in the box, build quality that undercuts most rivals at its price. If you want your first custom-feel board without a full custom-build project, it is one of the easiest recommendations we can make. Just know it is a kit you assemble, it is wired only, and the stock ABS keycaps will shine over time.
What It Is
The MOD 007 V2 is Akko’s enthusiast-leaning 75% board, sold as a DIY kit. You get the case, plates, PCB, stabilizers, and foam, and you add your own switches and keycaps (Akko also sells prebuilt versions). The headline is the value: a machined aluminum case and gasket mount at a price where most boards still use plastic. It is aimed at people who want that premium, flexy custom feel without sourcing every part themselves.
Build and Design
Out of the box the MOD 007 V2 feels the part. The CNC aluminum case is dense and solid, with none of the hollow flex you get from cheaper boards, and at around 1.4 kg it stays planted on the desk. The gasket mount softens each keystroke and, paired with the pre-installed Poron case foam and switch pads, gives a controlled sound with little of the hollow ping older boards suffer from.
The V2 refinements are what make it worth attention. The PCB is slimmed from 1.6 mm to 1.2 mm for more flex, it ships with both an aluminum plate (firmer, sharper) and a polycarbonate plate (softer, deeper), and the silicone gaskets can be swapped for spare Poron ones. In practice that means you can tune the feel and sound to your taste without buying a second board.
Specifications
| Layout | 75% (82 keys, standard ANSI) |
| Case | CNC-machined aluminum |
| Mount | Gasket mount (silicone / Poron gaskets) |
| Plates included | Aluminum and polycarbonate |
| PCB | 1.2 mm, hot-swap (3/5-pin), screw-in stabilizer support |
| Dampening | Pre-installed Poron case foam and switch pads |
| Weight | About 1.4 kg |
| Dimensions | 320 x 135 x 40 mm |
| Connection | Wired (USB-C) |
Typing Experience
Assembled with a decent linear or tactile switch, the MOD 007 V2 punches well above its price. The gasket mount and thin PCB give a gentle, cushioned flex that takes the harshness out of bottoming out, and the foam keeps the sound tight and clean. Swapping to the polycarbonate plate deepens the sound noticeably, while the aluminum plate keeps things crisp and firm. It genuinely feels like a board costing more than it does.
The screw-in stabilizers are good, though like almost any kit they benefit from a quick lube and tune to fully silence the larger keys. That is normal at this level and part of the fun for many builders.
Pros and Cons
Pros: premium aluminum build for the money, gasket mount with real flex, two plates included, hot-swap PCB, pre-installed quality foam, standard bottom row for easy keycap swaps, multiple colours.
Cons: it is a kit you assemble (switches and keycaps not included on the DIY version), wired only with no wireless option, stock ABS keycaps on the prebuilt will shine over time, and the stabilizers reward a little tuning out of the box.
Who Should Buy It
Buy it if you want your first taste of a premium, gasket-mounted aluminum board without building fully from scratch, and you are happy to drop in switches and keycaps. It is outstanding value for the feel you get.
Skip it if you need wireless, want something that works the moment it arrives with zero assembly or tuning, or you dislike ABS keycaps and do not want to buy a PBT set. For a fully assembled Akko option, see our Akko 3098B review, and browse more in our best Akko keyboards guide.
The Bottom Line
The Akko MOD 007 V2 delivers a genuinely premium typing feel, machined aluminum, gasket flex, and swappable plates, for a price that keeps embarrassing pricier boards. As long as you are comfortable assembling a kit and do not need wireless, it is one of the best value entries into the custom-feel world, and an easy board to recommend.
Frequently Asked Questions
Does the Akko MOD 007 V2 support hot-swapping?
Yes. It has a hot-swap PCB that accepts standard 3-pin and 5-pin MX-style switches, so you can change switches freely with no soldering. It is one of the board’s biggest strengths at this price.
Is the MOD 007 V2 wireless?
No, it is a wired USB-C board. If wireless is a must-have, this is not the right pick; look at a Bluetooth-capable Akko or another brand instead.
What switches should I use with it?
Any standard MX-style switch works. A smooth linear or a tactile like the Akko or Gateron ranges pairs well with the board’s flexy build. Choose based on whether you prefer a smooth or bumpy feel.
How does it differ from the Akko 007 PBT?
The main difference is the keycaps: the MOD 007 V2 ships with ABS keycaps, while the 007 PBT comes with more durable, shine-resistant PBT keycaps. The underlying board is otherwise similar.
Is the Akko MOD 007 V2 worth it?
For the build quality and typing feel, yes. Few boards offer a machined aluminum case, gasket mount, and two plates at this price. Just factor in that it is a kit and, on the DIY version, you supply switches and keycaps.
We update our keyboard reviews as new revisions and colourways are released.